Skip to content Skip to footer

How To Clean An HVAC Filter In Pittsburgh

How to Clean an HVAC Filter

There’s a lot of information out there about how to clean an HVAC filter, but little of it is true. The truth is that HVAC filters need to be cleaned every time they are replaced, which is every 3 months. The best way to know how to clean an HVAC filter is to try it out on one of your employees. By knowing how to clean an HVAC filter, you can ensure that they are as effective as possible and don’t leave any messes behind.

Know About How to Clean an HVAC Filter?

It’s no secret that HVAC systems can get pretty dirty, pretty quickly. But what many people don’t realize is just how important it is to keep those systems clean – especially the filters. Here are just a few reasons why it’s important to clean your HVAC filters:

1. Dirty filters can significantly reduce the efficiency of your HVAC system, leading to higher energy bills.

2. Dirty filters can also cause your HVAC system to work harder than it needs to, which can shorten its lifespan.

3. And finally, dirty filters can impact the indoor air quality of your home or office, leading to respiratory problems for occupants.

So there you have it – three good reasons to keep those HVAC filters clean!

Remove the old HVAC filter

How to Clean an HVAC Filter in Pittsburgh? If your home has an HVAC system, then you know that one of the most important things you can do to keep it running smoothly is to regularly change the filter. This article will walk you through the process step-by-step so that you can have your HVAC system up and running again in no time.

Depending on your particular system, this may be located in the return air duct, in the blower unit, or in a housing unit attached to the furnace. Once you’ve located it, simply remove the old filter and dispose of it properly.

Clean the HVAC housing unit

If your HVAC system is in need of a good cleaning, follow these simple steps to get the job done right. Step 2 is to clean the HVAC housing unit. This is an important part of keeping your HVAC system clean and in good working order. You will need to gather a few supplies before you begin, including a vacuum cleaner with a hose attachment, a soft-bristled brush, and some mild detergent.

Once you have everything you need, start by vacuuming the outside of the housing unit to remove any dirt and debris. Next, use the brush to scrub away any stubborn dirt or grime. If there are any tough spots, you can use the detergent to help break them up. Once you’ve cleaned the entire housing unit, rinse it off with some clean water and dry it completely before moving on to Step 3.

How to Clean an HVAC Filter

insert the new HVAC filter

Assuming you would like tips on how to insert a new HVAC filter:

Most home air filters are located in the return air ductwork near the furnace or air handler. To find your filter, follow the ductwork from the unit until you come to an opening where a filter is installed. The size and type of filter will be printed on the frame of the old filter. Purchase a replacement that is the same size and has the same MERV (Minimum Efficiency Reporting Value) rating.

To install the new filter, first, remove the old one by sliding it out of its slot. Some filters slide in metal tracks, while others just fit loosely in their housing. Be sure to note which way the arrows on the frame are pointing so you can insert the new filter in the same direction. Inserting it backward will reduce its effectiveness.

How to identify when your filter needs to be cleaned?

When it comes to your home’s air quality, the filter plays a key role in keeping things clean. But how do you know when it’s time to give it a good cleaning? Here are a few tips to help you out.

If you notice that your air conditioner or furnace isn’t working as well as it used to, it might be time to check the filter. A dirty filter can make your HVAC system work harder than necessary, leading to higher energy bills and potential damage.

Take a look at the filter itself. If it’s covered in dust or debris, it definitely needs to be cleaned or replaced. Depending on the type of filter you have, you may be able to clean it with soap and water. However, some filters need to be replaced after a certain amount of time.

The supplies you’ll need to clean your filter

You should clean your filter at least once a month, and more often if you have pets. The supplies you’ll need to clean your filter are:

  • A bucket
  • A hose
  • Filter cleaning solution
  • A soft brush

To clean your filter, first, remove it from the pool. Then, using the hose, rinse off any dirt or debris. Next, fill the bucket with water and add the filter-cleaning solution. Submerge the filter in the bucket and let it soak for 15 minutes. After 15 minutes, use the soft brush to scrub away any remaining dirt. Finally, rinse off the filter with fresh water from the hose and put it back in the pool.

Step-by-step guide to cleaning your HVAC filter

When it comes to keeping your HVAC system running smoothly, one of the most important things you can do is regularly clean or replace your filter. A dirty filter can lead to a number of problems, including reduced airflow and decreased efficiency.

How to Clean an HVAC Filter? Cleaning your HVAC filter is a fairly simple process, but it’s important to follow the steps carefully to avoid damaging the unit. Here’s a step-by-step guide to cleaning your HVAC filter:

  • Vacuum any dirt and debris from the housing unit.
  • Rinse the old filter with water (if it’s reusable) or dispose of it properly if it’s not.
  • Insert the new filter into the housing unit and make sure it’s properly secured.

How often to clean your HVAC filter?

If you have pets or live in a dusty area, you should check your HVAC filter every month and clean it as needed. If neither of those applies to you, checking every three months should be sufficient. A visual inspection will help you determine if the filter needs to be replaced or cleaned.

If the filter looks clean, but your HVAC system isn’t working properly, it may be time to replace the filter.

Cleaning or replacing your HVAC filter is a simple task that can make a big difference in the efficiency of your heating and cooling system. Not only will it save you money on your energy bill, but it will also prolong the life of your HVAC system.


It is important to clean your HVAC filter on a regular basis. This will help to prolong the life of your HVAC system and keep it running efficiently. There are a few different methods that you can use to clean your HVAC filter, and it is important to choose the one that is best suited for your specific system. With a little bit of care and maintenance, you can keep your HVAC system running smoothly for many years to come.

Contact us:

Leave a comment

    I agree that my submitted data is being collected and stored.